Initial Configuration - Larson Electronics EXPCMR-CER-IP-POE-4MP-IR-V3 User Manual

Initial Configuration

After you log in to the device, please perform the following initial configuration.
1 Ethernet.
Log out and log in again to the Web using the
2
new IP address.
3 Set the system time.
4 (Optional) Set the management
5 (Optional) Set the server for storing photos.
6 Set OSD.
7 (Optional) Manage
You can watch the live video after finishing the initial configuration. Please configure other parameters
as needed.
server.
users.
6
Reconfigure the device IP and network parameters
based on the actual networking.
-
Set the system time based on the actual situation.
Set the management server based on the actual
networking.
Set the server for storing photos based on the actual
networking.
Set the information displayed on the screen as needed,
for example, time.
Change the default password and add common users as
needed.