DHCP
The Dynamic Host Configuration Protocol (DHCP) is enabled by default when the camera is delivered.
If a DHCP server is deployed in the network, the camera can automatically obtain an IP address from
the DHCP server.
To manually configure DHCP, follow the steps below:
1. Click Setup > Network > Network.
2. Select DHCP from the IP Obtain Mode drop-down list.
3. Click Save.
DNS
This section allows users to configure the Domain Name Service (DNS) for the camera.
1. Click Setup > Network > DNS.
2. Enter the Preferred DNS Server and Alternate DNS Server.
3. Click Save.
10