Alarm Configuration; Configuring Motion Detection Alarm - Larson Electronics EXPCMR-CER-IP-POE-4MP-IR-V3 User Manual

Alarm Configuration

Alarm reporting can be scheduled for motion detection alarm and tampering detection alarm. The
supported alarms may vary with device model. For the alarm types that your camera supports, see the
Web interface.

Configuring Motion Detection Alarm

NOTE:

This function is only supported by certain models, please see the actual model for details.

The alarm triggered actions supported by the camera may vary with models, please see the
actual Web interface for details.
Motion detection detects the object motion in a specified rectangular area or on specified grids during a
period. You need to set a detection area or grids, sensitivity of detection, object size, and history for the
camera to decide whether to report a motion detection alarm when it detects motion.
Detection Mode: Area
1. Click Setup > Events > Common Alarm > Motion Detection > Detection Mode: Area.
2. In the Detection Area area, click
click .
to add a new detection area. To delete a detection area,
35