Intelligent Monitoring - Larson Electronics EXPCMR-CER-IP-POE-4MP-IR-V3 User Manual

Intelligent Monitoring

Intelligent monitoring includes intrusion detection or otherwise referred to as enter area detection. The
supported functions may vary with device model.
Intrusion Detection
Use Intrusion Detection (also called Enter Area Detection) to automatically detect when a person or
object goes into a particular region of interest.
1. Click Setup > Intelligent > Intrusion Detection.
2. Enable Intrusion Detection
3. Click , an octagon appears on the view. Click and drag on the lines to reposition or click and
drag the end points to re-shape the region of interest.
4. Set the time threshold, sensitivity, and percentage.
5. Select trigger action: to upload to screenshot to FTP or trigger by email. Make sure to complete
FTP and email settings first to make this feature work.
6. Set the schedule to activate intrusion detection. By default, the detection is enabled 24/7. To
disable it at certain times, click Unarmed then remove the blue highlight on the table. Or, click
33