Port; Port Mapping - Larson Electronics EXPCMR-CER-IP-POE-4MP-IR-V3 User Manual

Explosion proof network ip camera for cannabis extraction

Table of Contents

Port

NOTE:

This function is not supported by some models, please see the actual model for details.

1. Click Setup > Network > Port.

2. Configure relevant port numbers.

3. Click Save.

NOTE:

If the entered HTTP port number has been occupied, a prompt message will be displayed as

Port conflicts. Please try again. 23, 81, 82, 85, 3260 and 49152 are occupied by default. And other

occupied ports will be detected automatically.

1. Click Setup > Network > Port > Port Mapping.

2. Enable Port Mapping and select mapping type. If Manual is selected, then external ports must

be configured (external IP is obtained automatically by the camera). If the configured port is

occupied, then the Status will show Inactive.

3. Click Save.

Table of Contents