Table of Contents
Advertisement
Snapshot
1. Click Setup > Video > Snapshot.
2. Select On, and then set resolution, most large and schedule as needed. Some parameters are
described in the table below.
Parameter
Snapshot
Interval
Number to
Snapshot
Snapshot
Mode
3. Click Save.
Interval between two snapshots. For example, with Snapshot Interval set to 1 and
Number of Snapshot set to 2, the camera will take 2 snapshots (take one first and then
take another after 1 second).
Currently 1, 2, and 3 snapshots are allowed.
Schedule: You need to set a snapshot time, e.g., 19:12:00, which means the camera
takes a snapshot at 19:12:00.
Repeat: Allows you to set an interval(unit: sec). For example, according to the settings
shown in the figure above, 60 seconds must elapse before the camera takes another
two snapshots.
Description
29
Advertisement
Table of Contents
