Media Stream Configuration - Larson Electronics EXPCMR-CER-IP-POE-4MP-IR-V3 User Manual

Media Stream Configuration

NOTE: This function is only supported by certain models, please see the actual model for details.
Media Stream
You can display the established media streams from a camera. You may also set the camera so it
transmits code streams by the UDP or TCP protocol to a specified IP address and port number. The
settings can be saved and take effect after the camera is restarted.
1. Click Setup > Video > Media Stream.
2. Click , select a stream type, and then set the IP address and port number of the unicast or
multicast group for the decoding device that receives audio and video streams from the camera.
3. If you want the device to establish the media stream that has been configured before
automatically after the restart, select Enable for Persistent.
4. To delete a stream, click
5. Click Submit to complete the operations.
.
31