Turning Error Tones On And Off; Enabling Wireless Headset Bidirectional Signaling - Avaya J169 Manual

Customization
6. Press Save.

Turning error tones on and off

About this task
Use this procedure to activate the error tone alarm when you perform an incorrect action while
using the phone.
Procedure
1. Press the Main menu.
2. Scroll to Settings and press Select.
3. Scroll to Audio settings and press Select.
4. Use the Down Arrow key to go to the Error tones screen.
5. Press Toggle to turn error tones on or off.
6. Press Save.

Enabling wireless headset bidirectional signaling

Before you begin
Check if the headset supports electronic hook switch (EHS) signaling.
Note:
Headset Signaling setting is used to configure only DECT headsets and cannot be applied to
Bluetooth headsets.
Procedure
1. Press the Main menu.
2. Scroll to Settings and press Select.
3. Scroll to Audio settings and press Select.
4. Scroll to Headset signaling.
5. Press Toggle to select one of the following options:
• Disabled: Disables signaling from the phone to the headset.
• Switch hook and alert: Activates the link to the headset if you press Headset. When
the phone receives an incoming call, you hear the alert tone in the headset.
• Switch hook only: Activates the link to the headset if you press Headset. When the
phone receives an incoming call, you do not hear the alert tone in the headset.
6. Press Save.
February 2021 Using Avaya J169 and J179 SIP IP Phones in Avaya Aura
Comments on this document? infodev@avaya.com
®
118