Download Print this page

Advertisement

Quick Links

©2017 ADJ Products, LLC all rights reserved. Information,
specifications, diagrams, images, and instructions herein are
subject to change without notice. ADJ Products, LLC logo and
identifying product names and numbers herein are trademarks
of ADJ Products, LLC. Copyright protection claimed includes all
forms and matters of copyrightable materials and information
now allowed by statutory or judicial law or hereinafter granted.
SABER SPOT WW
Product names used in this document may be trademarks or
registered trademarks of their respective companies and are
hereby acknowledged. All non-ADJ Products, LLC brands and
product names are trademarks or registered trademarks of their
respective companies.
ADJ Products, LLC and all affiliated companies hereby dis-
claim any and all liabilities for property, equipment, building,
and electrical damages, injuries to any persons, and direct or
indirect economic loss associated with the use or reliance of
any information contained within this document, and/or as a
result of the improper, unsafe, unsufficient and negligent as-
sembly, installation, rigging, and operation of this product.
Europe Energy Saving Notice
User Instructions
Energy Saving Matters (EuP 2009/125/EC)
Saving electric energy is a key to help protecting the enviroment.
Please turn off all electrical products when they are not in use. To
avoid power consumption in idle mode, disconnect all electrical
equipment from power when not in use. Thank you!
09/20
4 0 1 0 7 6 5

Advertisement

loading

Summary of Contents for ADJ SABER SPOT WW

  • Page 1 ©2017 ADJ Products, LLC all rights reserved. Information, specifications, diagrams, images, and instructions herein are subject to change without notice. ADJ Products, LLC logo and identifying product names and numbers herein are trademarks of ADJ Products, LLC. Copyright protection claimed includes all forms and matters of copyrightable materials and information now allowed by statutory or judicial law or hereinafter granted.
  • Page 2 Introduction: • Digital Display for Address and Function Setting ture. The Saber Spot WW can operate as a stand alone fixture or in a • UC IR Compatible (Not Included) & Airstream App Compatible primary/secondary set up. The Saber Spot WW has three operating •...
  • Page 3 Your cables should be made with Figure 1 ADJ Products, LLC - www.adj.com - Saber Spot WW Instruction Manual Page 4 ADJ Products, LLC - www.adj.com - Saber Spot WW Instruction Manual Page 5...
  • Page 4 120 Ohm 1/4 W) between PIN 2 (DMX-) Figure 4 and PIN 3 (DMX +) of the last fixture. ADJ Products, LLC - www.adj.com - Saber Spot WW Instruction Manual Page 6 ADJ Products, LLC - www.adj.com - Saber Spot WW Instruction Manual Page 7...
  • Page 5: Dmx Mode

    1. Press the MENU button until “LOOK” is displayed, press ENTER. 2. Use the UP or DOWN buttons to find your desired mode. ADJ Products, LLC - www.adj.com - Saber Spot WW Instruction Manual Page 8 ADJ Products, LLC - www.adj.com - Saber Spot WW Instruction Manual Page 9...
  • Page 6 Fahrenheit. Press ENTER to select your desired setting. ATRE”. See the dimmer curve chart on page 199 for more info. ADJ Products, LLC - www.adj.com - Saber Spot WW Instruction Manual Page 11 ADJ Products, LLC - www.adj.com - Saber Spot WW Instruction Manual Page 10...
  • Page 7 This function will reverse the display 180º. 1. Press the either the MENU button until “FlipDisplay” is dis- ADJ Products, LLC - www.adj.com - Saber Spot WW Instruction Manual Page 12 ADJ Products, LLC - www.adj.com - Saber Spot WW Instruction Manual Page 13...
  • Page 8: Primary-Secondary Set Up

    Installing the Frost Lens linked together to run a built-in program. The Saber Spot WW Plus comes with 2 frost filters. Install the filter in 1. Press the MENU button until “Look” is displayed, and press front of the lens and put the inlcuded retainer ring top to hold the lens ENTER.
  • Page 9: Warm White

    SOUND ON & OFF - These buttons are invalid for this fixture. SHOW 0 - This button is invalid for this fixture. ADJ Products, LLC - www.adj.com - Saber Spot WW Instruction Manual Page 16 ADJ Products, LLC - www.adj.com - Saber Spot WW Instruction Manual Page 17...
  • Page 10 135mm [5.3in] 160mm [6.3in] 28mm [1.1in] 108mm [4.3in] 76mm [3.0in] 230mm [ 9.1in ] ADJ Products, LLC - www.adj.com - Saber Spot WW Instruction Manual Page 18 ADJ Products, LLC - www.adj.com - Saber Spot WW Instruction Manual Page 19...
  • Page 11 10° Diameter(m) 0.17 0.35 0.52 0.70 0.87 8° Diameter(m) 0.31 0.48 0.66 0.83 0.13 ADJ Products, LLC - www.adj.com - Saber Spot WW Instruction Manual Page 20 ADJ Products, LLC - www.adj.com - Saber Spot WW Instruction Manual Page 21...
  • Page 12 1. Be sure the strobe setting is set to value 255. 45° Diameter(m) 0.83 1.66 2.49 3.31 4.14 ADJ Products, LLC - www.adj.com - Saber Spot WW Instruction Manual Page 22 ADJ Products, LLC - www.adj.com - Saber Spot WW Instruction Manual Page 23...
  • Page 13 ADJ Products, LLC concludes, after inspection, affects the reliability of the product; if the product has been repaired or serviced by anyone other than the ADJ Products, LLC factory unless prior written authorization was issued to purchaser by ADJ Products, LLC; if the product is damaged because not properly maintained as set forth in the instruction manual.
  • Page 14 A.D.J. Supply Europe B.V. Junostraat 2 6468 EW Kerkrade The Netherlands service@adjgroup.eu / www.adj.eu Tel: +31 45 546 85 00 / Fax: +31 45 546 85 99 ADJ Products, LLC - www.adj.com - Saber Spot WW Instruction Manual Page 26...