ADJ Startec STINGER User Manual page 11

Stinger
LCD DISPLAY LOCK:
The display will lock after 30 seconds. Press and hold the MENU button for at least 10 seconds to
unlock the display and access the menu.
ADDR - DMX Address Setting.
1. Press the either the MENU button until "ADDR" is displayed, press ENTER.
2. The current DMX address will now be displayed. Press the UP or DOWN buttons to find your
desired address. Press ENTER to set your desired DMX address.
SHOW - Show mode. There are 7 show modes to choose from.
1. Press the MENU button until "Show" is displayed, press ENTER.
2. The display will show one of seven auto show modes. Use the UP or DOWN buttons to find your
desired show and press ENTER to activate. See the table in this section for details regarding the
different show modes.
SENS - Sets the sensitivity in Sound Active mode.
1. After switching on Sound Active mode, press the MENU button until "Sens" is displayed. Press
ENTER.
2. Press UP or DOWN to adjust the sensitivity between 0 and 99. 0 is the least sensitive, and 99 is
the most sensitive.
3. Press ENTER to confirm your selection.
SOUN - Sound Active mode.
1. Press the MENU button until "Soun" is displayed, press ENTER.
2. Use the UP or DOWN buttons to either turn sound activity "On" or "Off", and press ENTER.
VER - Use this function to display the Software version of the unit.
1. Press the either the MENU button until "VER" is displayed, press ENTER.
2. The display will show the software version.
ADJ Products, LLC - www.adj.com - Stinger User Manual Page 11
System Menu