Table of Contents
Advertisement
Vertical models
The models size 4 to 27 are supplied with support feets, while the models size 45 and 60 are supplied
with a perimetral bed. This bed must be in contact with the ground or with a fl at surface. It is essential
that the weight of the equipment was distributed between all points of support to prevent unit defor-
mation.
The installer must make sure that the ceiling structure and the securing elements can bear the
weight of the unit, taking into account that it is a dynamic load.
Models 04 to 33
Models 45 to 100
Horizontal models of sizes 45 and 60
IMPORTANT!
Particularities in the installation of horizontal versions LH and RH
For a correct evacuation of condensation generated into the heat exchanger, it is necessary to install the
unit with a minimum slope of 3º to the side where the extraction fan is placed:
6
Model
Weight (kg)
4
149
8
185
12
192
16
237
21
335
27
372
33
422
Model
Weight (kg)
45
597
60
730
100
862
Advertisement
Table of Contents
