Filter Installation - S&P CADB-HE BASIC Series Manual

Replacement fi lters are delivered in a plastic bag for extra protection. Remove the bag before installing
the fi lter into the unit.
Before installing the fi lter make sure that the airfl ow direction is correct. (indicated by an arrow in the
fi lter).
Filters parts table
Heat recovery Ø
model (mm)
CADB-HE-D 04
200
CADB-HE-D 08 250
CADB-HE-D 12 315
CADB-HE-D 16
315
CADB-HE-D 21
400
CADB-HE-D 27 400
CADT-HE-D 33 400
CADT-HE-D 45
600x400
CADT-HE-D 60 700x500
CADT-HE-D 100 1100x610

11.2. FILTER INSTALLATION

The heat recovery is supplied with mounted fi lters.
Low pressure F7 fi lter for supply air and M5 for extract air.
Possibility of mounting a second fi lter as accessory.
Installation additional fi lter:
1. Loosen the two sets of fi lter support brackets (A).
2. Remove the fi lter holder (B).
3. Fit the second fi lter (C) ensuring that the direction of air is
correct (indicated in the frame of the fi lter).
4. Ensure that the fi rst fi lter the air passes is the lower grade
of fi ltration.
5. Once both fi lters have been through fi tted place the fi lter
supports (B) symmetrically and tighten the 4 brackets (A).
AFR-HE (Accessory fi lters and spare part for CADB/T-HE)
AFR-HE G4
AFR-HE 200/04 G4
AFR-HE 250/08 G4
AFR-HE 315/12 G4
AFR-HE 315/16 G4
AFR-HE 400/21-27 G4 AFR-HE 400/21-27 M5 AFR-HE 400/21-27 F7
AFR-HE 400/21-27 G4 AFR-HE 400/21-27 M5 AFR-HE 400/21-27 F7
AFR-HE 400/33 G4
AFR-HE 450/40-45 G4 AFR-HE 450/40-45 M5 AFR-HE 450/40-45 F7
AFR-HE 500/54-60 G4 AFR-HE 500/54-60 M5 AFR-HE 500/54-60 F7
AFR-HE 710/100 G4 AFR-HE 710/100 M5
AFR-HE M5
AFR-HE 200/04 M5 AFR-HE 200/04 F7
AFR-HE 250/08 M5 AFR-HE 250/08 F7
AFR-HE 315/12 M5 AFR-HE 315/12 F7
AFR-HE 315/16 M5 AFR-HE 315/16 F7
AFR-HE 400/33 M5 AFR-HE 400/33 F7
AFR-HE 710/100 F7
AFR-HE F7 AFR-HE F9
AFR-HE 200/04 F9
AFR-HE 250/08 F9
AFR-HE 315/12 F9
AFR-HE 315/16 F9
AFR-HE 400/21-27 F9
AFR-HE 400/21-27 F9
AFR-HE 400/33 F9
AFR-HE 450/40-45 F9
AFR-HE 500/54-60 F9
AFR-HE 710/100 F9
A
A
C
A
B
A
A
A
B
A
B
A
33