[Digital Link In] - Panasonic DLP PT-RZ34K Operating Instructions Manual

Note
f This function does not operate when the HD-SDI signal is input.
Setting [SYSTEM SELECTOR] in [SDI IN]
1) Press as to select [SDI IN].
2) Press the <ENTER> button.
f The [SDI IN] screen is displayed.
3) Press as to select [SYSTEM SELECTOR].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
[RGB]
[YP P 4:4:4]
B R
[YP P 4:2:2]
B R
Setting [BIT DEPTH] in [SDI IN]
1) Press as to select [SDI IN].
2) Press the <ENTER> button.
f The [SDI IN] screen is displayed.
3) Press as to select [BIT DEPTH].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
[12-bit]
[10-bit]
Setting [SIGNAL LEVEL] in [SDI IN]
1) Press as to select [SDI IN].
2) Press the <ENTER> button.
f The [SDI IN] screen is displayed.
3) Press as to select [SIGNAL LEVEL].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[64-940]
[4-1019]

[DIGITAL LINK IN]

Set this item in accordance with the video signal input to the <DIGITAL LINK> terminal.
Setting [SIGNAL LEVEL] in [DIGITAL LINK IN]
1) Press as to select [DIGITAL LINK IN].
Chapter 4 Settings — [DISPLAY OPTION] menu
Automatically selects [RGB], [YP
[RGB], [YP P 4:4:4], or [YP
B R B
the input signal. [RGB] is selected when the payload ID is not attached to the input signal.
Fixes to [RGB].
Fixes to [YP P 4:4:4].
B R
Fixes to [YP P 4:2:2].
B R
Automatically selects [12-bit] or [10-bit].
Fixes to [12-bit].
Fixes to [10-bit].
Normally use this setting.
Select this item when gray is displayed as black.
P 4:4:4], or [YP P 4:2:2].
B R B R
P 4:2:2] is automatically selected by reading the payload ID attached to
R
ENGLISH - 143