Table of Contents
Advertisement
[PICTURE] menu
On the menu screen, select [PICTURE] from the main menu, and select an item from the sub-menu.
Refer to "Navigating through the menu" (x page 98) for the operation of the menu screen.
[PICTURE MODE]
You can switch to the desired picture mode suitable for the image source and the environment in which the
projector is used.
1)
Press as to select [PICTURE MODE].
2)
Press qw.
f The [PICTURE MODE] individual adjustment screen is displayed.
3)
Press qw to switch the item.
f The items will switch each time you press the button.
[STANDARD]
[CINEMA]
[NATURAL]
[DICOM SIM.]
[DYNAMIC]
[GRAPHIC]
[USER]
Note
f DICOM is an abbreviation of "Digital Imaging and COmmunication in Medicine" and is a standard for medical imaging devices. Although the
DICOM name is used, the projector is not a medical device, and should not be used for purposes such as diagnosis of display images.
f Press the <ENTER> button when each [PICTURE MODE] is selected to save as a specified value when a new signal is input. The data of
all items except [SYSTEM SELECTOR] in the [PICTURE] menu is saved.
f In the factory default settings, [USER] is set to images that comply with the ITU-R BT.709 standard.
Changing the [USER] name
1)
Press as to select [PICTURE MODE].
2)
Press qw to select [USER].
3)
Press the <ENTER> button.
f The [PICTURE MODE] detailed screen is displayed.
4)
Press as to select [PICTURE MODE NAME CHANGE], and press the <ENTER> button.
f The [PICTURE MODE NAME CHANGE] screen is displayed.
5)
Press asqw to select the text, and press the <ENTER> button to enter the text.
6)
Press asqw to select [OK], and press the <ENTER> button.
f The picture mode name is changed.
[CONTRAST]
You can adjust the contrast of the colors.
1)
Press as to select [CONTRAST].
2)
Press qw or the <ENTER> button.
f The [CONTRAST] individual adjustment screen is displayed.
3)
Press qw to adjust the level.
Operation
Press w.
Press q.
104 - ENGLISH
Chapter 4 Settings — [PICTURE] menu
The image becomes suitable for moving images in general.
The image becomes suitable for movie contents.
The image is sRGB compliant.
The image becomes similar to that of DICOM Part 14 Grayscale Standard.
The image becomes suitable for use in bright areas.
(Factory default setting)
The image becomes suitable for input from the personal computer.
Set any desired picture mode.
Adjustment
The screen becomes brighter.
The screen becomes darker.
Range of adjustment
-31 - +31
Advertisement
Table of Contents
