Table of Contents
Advertisement
Projecting
Check the projection lens attachment (x page 57), external device connection (x page 59), and power cord
connection (x page 68), and then switch on the power (x page 70) to start projecting. Select the video for
projection, and adjust appearance of the projected image.
Selecting the input signal
The input of the image to project can be switched. Method to switch the input is as follows.
f Press the input selection button on the remote control and directly specify the input of the image to project.
f Press the input selection button on the control panel and directly specify the input of the image to project.
f Display the input selection screen and select the input of the image to project from the list.
Switching the input directly with the remote control
The input of the image to project can be switched by directly specifying it with the input selection button on the
remote control.
1)
Press the input selection button (<HDMI>, <DISPLAYPORT>, <DVI-D>, <SDI>, <DIGITAL LINK>,
<SLOT 1>).
<HDMI>
<DISPLAYPORT>
<DVI-D>
<SDI>
<DIGITAL LINK>
<SLOT 1>
Chapter 3 Basic Operations — Projecting
Remote control
Switches the input to HDMI.
The image of the signal input to the <HDMI IN> terminal equipped on the projector as standard is
projected.
All the HDMI inputs including the HDMI input equipped on the projector as standard and the HDMI
input on the Interface Board are switched every time the button is pressed when the optional Interface
Board equipped with the HDMI input is installed in the slot.
Switches the input to DisplayPort.
This can be operated when the optional Interface Board equipped with the DisplayPort input is
installed in the slot.
The input is switched every time the button is pressed when one of the DisplayPort inputs is selected
on the installed optional Interface Board.
Switches the input to DVI-D.
The image of the signal input to the <DVI-D IN> terminal equipped on the projector as standard is
projected.
All the DVI-D inputs including the DVI-D input equipped on the projector as standard and the DVI-D
input on the Interface Board are switched every time the button is pressed when the optional Interface
Board equipped with the DVI-D input is installed in the slot.
Switches the input to SDI.
The image of the signal input to the <SDI IN> terminal equipped on the projector as standard is
projected.
All the SDI inputs including the SDI input equipped on the projector as standard and the SDI input on
the Interface Board are switched every time the button is pressed when the optional Interface Board
equipped with the SDI input is installed in the slot.
Switches the input to DIGITAL LINK.
The image of the signal input to the <DIGITAL LINK> terminal is projected.
Switches the input to the signal of the optional Interface Board installed in <SLOT>.
The input is switched every time the button is pressed when one of the inputs is selected on the
installed optional Interface Board.
Control panel
ENGLISH - 79
Advertisement
Table of Contents
