Table of Contents
Advertisement
23) Press qw to switch the item.
f The items will switch each time you press the button.
[2]
[3]
[5]
[9]
[17]
*1 The points are not placed at equally spaced intervals.
24) Press as to select [EXECUTE].
25) Press the <ENTER> button.
f The projector will go into the adjustment mode.
26) Press asqw to select the adjustment point.
f Move the marker over to the point to adjust.
f Press qw to select the adjustment point when [UPPER FREE SHAPE] or [LOWER FREE SHAPE] is
selected in Step 19).
f Press as to select the adjustment point when [LEFT FREE SHAPE] or [RIGHT FREE SHAPE] is selected
in Step 19).
27) Press asqw to adjust the position of the adjustment point.
f Press as to adjust [VERTICAL] when [UPPER FREE SHAPE] or [LOWER FREE SHAPE] is selected in
Step 19).
f Press qw to adjust [HORIZONTAL] when [LEFT FREE SHAPE] or [RIGHT FREE SHAPE] is selected in
Step 19).
f By adjusting the position of the adjustment point, the border between the adjacent adjustment point will be
interpolated by a straight line.
f To continuously adjust the positions of other adjustment points, return to Step 26).
f Pressing the <MENU> button twice allows to reselect the items for [BLACK BORDER AREA].
28) Press as to select [BLACK BORDER LEVEL].
29) Press the <ENTER> button.
f The adjustment area in the projected image becomes temporarily bright and the [BLACK BORDER
LEVEL] screen is displayed.
f [RED], [GREEN], and [BLUE] can be adjusted individually if [INTERLOCKED] is set to [OFF].
30) Press as to select an item, and press qw to adjust the setting.
f Once the adjustment is completed, press the <MENU> button to return to the [BLACK LEVEL ADJUST]
screen.
31) Press as to select [UPPER], [LOWER], [LEFT], or [RIGHT] for [OVERLAPPED BLACK LEVEL].
32) Press the <ENTER> button.
f The adjustment area in the projected image becomes temporarily bright and the [OVERLAPPED BLACK
LEVEL] screen is displayed.
f [RED], [GREEN], and [BLUE] can be adjusted individually if [INTERLOCKED] is set to [OFF].
33) Press as to select an item, and press qw to adjust the setting.
[NON-OVERLAPPED BLACK LEVEL]
124 - ENGLISH
Chapter 4 Settings — [ADVANCED MENU] menu
Adjusts the shape of the border at points on both ends.
Adjusts the shape of the border at three points
Adjusts the shape of the border at five points
Adjusts the shape of the border at nine points
Adjusts the shape of the border at 17 points
[BLACK BORDER AREA] (Right)
Projection range
[BLACK BORDER LEVEL]
.
*1
.
*1
.
*1
.
*1
Edge blending [WIDTH] (Right)
[MARKER] (Red)
Edge blending [START] (Right)
([MARKER] (Green))
[OVERLAPPED BLACK LEVEL] (Right)
Advertisement
Table of Contents
