Table of Contents
Advertisement
Chapter 5 Operations — Using the information monitor function
Basic operation procedure in the menu operation mode
1)
Press the <INFO> button on the control panel.
f The top menu screen is displayed.
2)
Press as to select a top menu item.
f The selected item is displayed inverted.
3)
Press the <ENTER> button.
f The sub-menu for the selected top menu is displayed.
4)
Press as to select a sub-menu item, and press the <ENTER> button.
f The setting screen is displayed.
5)
Press qw to change the setting.
Note
f Pressing the <INFO> button during the menu operation mode returns to the previous menu screen.
f Information monitor will transfer to the hide mode/USER VIEW mode automatically if there is no operation for approximately 60 seconds
during the menu operation mode. Pressing the <INFO> button on the control panel returns to the original menu operation mode display.
[USER VIEW] menu
Set the information monitor to the menu operation mode by pressing the <INFO> button on the control panel.
For the operation of the menu, refer to "Basic operation procedure in the menu operation mode" (x page 262).
[USER VIEW]
Display the basic information of the projector.
1)
Press as to select [USER VIEW].
2)
Press the <ENTER> button.
f The information is displayed.
3)
Press as to switch the pages.
f The page will change each time you press the button.
[INPUT]
[SIGNAL NAME]
[AC VOLTAGE]
[INTAKE AIR TEMP.]
[EXHAUST AIR TEMP.]
262 - ENGLISH
USER VIEW
SETUP
STATUS
USER VIEW
SETUP
STATUS
ID
INFO MONITOR
NETWORK
Currently selected input terminal
Input signal name
Input supply voltage
Intake air temperature of the projector
Exhaust air temperature of the projector
*1
Advertisement
Table of Contents
