Table of Contents
Advertisement
Select [6], [7], or [8] for the second and subsequent projectors.
f Stereo synchronization is a signal having a 50 % duty cycle where High is for the left eye and Low is for the
right eye.
f "H" is output to the 3D image display and "L" is output to the 2D image display from the terminal for which
3D trigger output is selected.
Note
f [11] in [3D SYNC MODE] is the setting when the 3D IR transmitter TY-3DTRW of Panasonic (production discontinued) is used with the
projector. Consult your dealer regarding the connection method.
f The following settings are disabled and the contrast synchronization function and shutter synchronization function cannot be used when [3D
SYNC SETTING] is set to anything other than [OFF].
g The [PICTURE] menu → [DYNAMIC CONTRAST] → [USER] → [MULTI PROJECTOR SYNC]
g The [DISPLAY OPTION] menu → [SHUTTER SETTING] → [MULTI PROJECTOR SYNC]
g The [PROJECTOR SETUP] menu → [MULTI PROJECTOR SYNC]
f The [3D SYNC SETTING] setting is disabled and fixed to [OFF] when the [PROJECTOR SETUP] menu → [MULTI PROJECTOR SYNC] →
[MODE] is set to anything other than [OFF].
[3D SIMUL INPUT SETTING]
Set this function when the 3D video signal in simultaneous format is input and used.
This can be set when the optional Interface Board supporting the simultaneous input is installed in the slot.
1)
Press as to select [3D SIMUL INPUT SETTING].
2)
Press the <ENTER> button.
f The [3D SIMUL INPUT SETTING] screen is displayed.
3)
Press as to select [SLOT IN].
4)
Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[AUTO]
Note
f 3D image is displayed when the same 3D video signals are input to each input terminal and set to [AUTO].
f [3D SIMUL INPUT SETTING] cannot be set when the [DISPLAY OPTION] menu → [BACKUP INPUT SETTING] → [BACKUP INPUT
MODE] is set so that the input of the Interface Board is included in the primary input or the secondary input.
f This may not function properly for some connected external devices.
f This may not function properly depending on the signal.
f Usage of each input signal is displayed in [HDMI1 [SLOT]] and [HDMI2 [SLOT]], in [DVI-D1 [SLOT]] and [DVI-D2 [SLOT]], and in [SDI1
[SLOT]] and [SDI3 [SLOT]] of the [3D SIMUL INPUT SETTING] screen when [AUTO] is set.
r [3D SIMUL INPUT SETTING] screen
Usage of each input signal is displayed under the setting items of [SLOT IN] in the [3D SIMUL INPUT SETTING]
screen when [AUTO] is set.
Usage of the input signal
[LEFT INPUT]
[RIGHT INPUT]
[3D INPUT FORMAT]
Set the 3D format for the image signals being input.
Set a 3D format that matches the input signal.
1)
Press as to select [3D INPUT FORMAT].
2)
Press the <ENTER> button.
f The [3D INPUT FORMAT] screen is displayed.
3)
Press as to select a 3D format.
[AUTO]
*1
Chapter 4 Settings — [3D SETTINGS] menu
This is not used for 3D simultaneous input.
Displays the 3D image in simultaneous format using the signals input to the two input terminals on the
Interface Board.
Uses the signal for the corresponding input as a signal for the left eye image.
Uses the signal for the corresponding input as a signal for the right eye image.
Automatically detects 3D format of input image signals to display images.
Details
ENGLISH - 129
Advertisement
Table of Contents
