Table of Contents
Advertisement
Sub-menu item
[NETWORK CONTROL]
[PJLink]
[Art-Net]
*1 [WIRELESS LAN] cannot be set if the optional Wireless Module (Model No.: AJ-WM50 Series) is not attached to the <USB> terminal.
Note
f Some items may not be adjusted or used for certain signal formats to be input to the projector.
When the items cannot be adjusted or used, the items in the menu screen are shown in black characters, and they cannot be adjusted or
set.
f Sub-menu items and factory default settings vary depending on the selected input terminal.
f The [NETWORK] menu → [NFC SETTING] is displayed when the NFC function is enabled.
The optional NFC Upgrade Kit (Model No.: ET-NUK10) can be used to enable the NFC function of the projector. Note that there are some
models that have the NFC function enabled from the time of factory shipment, and there are some countries or regions where the NFC
Upgrade Kit cannot be applied.
For the availability of the NFC function in the country or region where you purchased the product, visit the Panasonic website (https://
panasonic.net/cns/projector/) or consult your dealer.
Chapter 4 Settings — Menu navigation
Factory default
[SIMPLE] mode
―
―
―
―
Page
221
l
221
l
223
ENGLISH - 103
Advertisement
Table of Contents
