Setting Pop-Up Alert - GeoVision GV-Tower System V2 User Manual

3.9.4 Setting Pop-up Alert

You can be alerted by pop-up live videos when motion is detected or I/O devices are
triggered.
1. Use the Display list to select the monitor to be configured.
2. In the upper-left column, click Event Popup. This page appears.

Motion Trigger: The live video of selected cameras pops up when motion is detected.

I/O Trigger: The live video of assigned camera pops up when the selected input device
is triggered.

Popup Dwell Time: Specify the amount of time that a pop-up live video remains in the
foreground.

Popup Interruption Interval: Specify the interval between camera pop-ups. This option
is useful when several cameras are activated for pop-up alert at the same time.
3. Use the Display list to select other monitors for setup.
4. After above settings, click the Matrix icon and return to Figure 3-31.
5. Select Event Popup Mode. Then select Fixed Position of Camera or Random Position
of Camera. For these two options, see 3.9.4.1 Setting Pop-up Positions.
6. Click OK.
7. Start monitoring. When motion is detected or the input device is triggered, the live video
will pop up for alert.
30
Figure 3-32