Chapter 4 Troubleshooting - GeoVision GV-Tower System V2 User Manual

Chapter 4 Troubleshooting

GV-Tower NVR/VMS System V2 (Rev. C) stops responding (aka "crashed" or
"froze").
If your GV-Tower NVR/VMS System V2 (Rev. C) is not responding to your clicking, typing, or
mouse movements, try these steps to get your GV-Tower NVR/VMS System V2 (Rev. C) back
on track. Please note that you will lose any unsaved changes in all open applications.
1. Restart your GV-Tower NVR/VMS System V2 (Rev. C) by pressing the Reset button on
the front panel.
2. If your GV-Tower NVR/VMS System V2 (Rev. C) is still unresponsive, press the Power
button to shut it down. Wait 30 seconds and then restart your GV-Tower NVR/VMS
System V2 (Rev. C).
35
Figure 4-1
Troubleshooting
4