3.5 Adding the Hard Drive to the Recording Path
For GV-Tower NVR/VMS System V2 (Rev. C), you need to add the formatted hard drives to
the recording path before recording.
3.5.1 GV-Tower NVR System V2 (Rev. C)
1. Click the Windows Start button, click GV-NVR, and select Hot Swap HDD Tool. The
MediaMan Tools window appears.
Figure 3-17
2. If a hard drive is already inserted, right-click it in the MediaMan Tools window, select Add
for recording, and then select the storage group from the drop-down list.
Getting Started
3
17