System Restoration - GeoVision GV-Tower System V2 User Manual

Hide thumbs Also See for GV-Tower System V2:
Table of Contents

Advertisement

3.10 System Restoration

You can restore preinstalled files once they are damaged by running the recovery from the
hidden partition. To restore the operating system and all preinstalled software, follow the steps
below.
Note: After recovery, you need to re-install all settings and passwords. But the recovery will
not delete your recording files saved on the GV-Tower NVR/VMS System V2 (Rev. C) since it
only reformats the partition C and all of your files are still stored on other partitions.
1. Remove or turn off the power of any connected USB devices.
2. Turn off the power of all drive bays.
3.
Restart the
GV-Tower NVR/VMS System V2 (Rev.
4.
Press F11 button several times to avoid accessing the system.
5. When this screen appears, click the OneKey System Recovery button.
6. Select Restore system using the image file in AOMEI OneKey Recovery Partition
and click Next.
Figure 3-33
Getting Started
3
C).
33

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gv-tower nvr system v2Gv-tower vms system v2

Table of Contents