Table of Contents
Advertisement
prescribed by the regulations in force
in the country where you are driving
(Highway Code).
To turn the lights off, turn the light
switch ring to the O position
HEADLIGHTS OFF TIMER
Function activation
It is possible to enable switching on the
lights for the preset time by turning the
ignition device to STOP, with the light
switch ring nut in position
turning the ring nut to position O.
WARNING To activate this function the
headlights must be deactivated within
2 minutes after the ignition device has
been taken to STOP.
Automatic function activation
(where provided)
If the car is equipped with a dusk
sensor, it is possible to enable the
function automatically: with the starter
switch in MAR, turn the light switch ring
nut to AUTO, if the sensor reports low
light levels, it will enable the dipped
beam headlights.
The headlights off delay is enabled
automatically when the ignition device is
turned to STOP with the headlights on
for the time selected in the Menu.
Function deactivation
This function is disabled by waiting for
the time set by the Menu, or by turning
the ignition device to MAR.
If the headlights are switched off
before the ignition, they will switch off
normally.
MAIN BEAM HEADLIGHTS
To activate the fixed main beam
and then
headlights, with the starter switch in
MAR, push left lever (A) fig. 30 (car
travel direction). The light switch should
be turned to AUTO with the dipped beam
headlights on, or it should be turned to
position
.
To flash, the unstable position is used
(activate by pulling the lever towards
you). With main beam headlights on, the
warning light
will come on at the same time.
The main beam headlights are
deactivated bringing the lever back to
the central stable position. Warning light
switches off in the instrument panel.
30
Automatic main beam headlights
This function is enabled with the display
Menu or the Uconnect™ system, and
with the light switch turned to AUTO.
The first time the main beam headlights
are activated (pushing the left lever), the
function is activated (green warning light
If the main beam headlights are actually
on, the blue warning light
on the instrument panel
come on in the instrument panel.
To deactivate the automatic function
rotate the light switch ring to position
comes on in the instrument panel).
will also
.
J0A0063C
29
Advertisement
Table of Contents
