Table of Contents
Advertisement
14) If a passenger is present, it won't
be possible to use the armrest, but the
central backrest needs to be properly
attached.
IMPORTANT
4) The fabric upholstery of the seats has
been designed to withstand long-term
wear deriving from normal use of the car.
Some precautions are however required.
Avoid prolonged and/or excessive rubbing
against clothing accessories such as
metal buckles and Velcro strips which, by
applying a high pressure on the fabric
in a small area, could cause it to break,
thereby damaging the upholstery.
5) Do not arrange objects beneath the
electrically adjustable seat and do not
impede its movement, since the controls
may be damaged. They may also restrict
the seat travel.
6) Before tilting the backrest, remove any
objects on the seat cushion.
24
HEAD RESTRAINTS
ADJUSTMENTS
15)
Upwards adjustment: raise the head
restraint until it clicks into place.
Downward adjustment: press button (A)
fig. 21 (front head restraints) and (A)
fig. 22 (rear head restraints) and lower
the head restraint.
21
22
HEAD RESTRAINTS (removal)
Proceed as follows to remove the head
restraints:
raise the head restraints to their
maximum height;
press the button (A) and the device
(B) fig. 21 (front head restraints) or (A)
and (B) fig. 22 (rear head restraints)
on the side of the two supports, then
remove the head restraints pulling them
upwards.
J0A0500C
WARNING
15) Head restraints must be adjusted
so that the head, rather than the neck,
rests on them. Only in this case they can
protect your head correctly.
J0A0058C
Advertisement
Table of Contents
