Table of Contents
Advertisement
Before using Apple CarPlay, enable Siri
from "Settings" > "General" > "Siri" on
the smartphone.
To use Apple CarPlay, the smartphone
must be connected to the car by means
of a USB cable.
Android Auto APP Setup
Before use, download the Android Auto
application to your smartphone from
Google Play Store.
The application is compatible with
Android 5.0 (Lollipop) and later versions.
To use Android Auto, the smartphone
must be connected to the car by means
of a USB cable.
On the first connection, you will have
to perform the setup procedure that
appears on the smartphone. You can only
perform this procedure with the vehicle
stationary.
Once connected to the USB port, the
Android Auto application establishes a
parallel Bluetooth® connection.
Interaction
After the setup procedure, the
application will run automatically on
the Uconnect™ system when your
smartphone is connected to the USB
port in the car.
Apple CarPlay: to integrate with Apple
CarPlay, press the button on the steering
wheel
(hold the button pressed) and,
using the TUNE SCROLL / BROWSE ENTER
button/knob select and confirm or hold
the "Home" graphic button pressed (long
press on the graphic button) on the
display in Apple CarPlay.
Android Auto: to integrate with Apple
CarPlay, press the button on the steering
wheel
(hold the button pressed) and,
using the TUNE SCROLL / BROWSE ENTER
button/knob select and confirm or hold
the "Microphone" graphic button pressed
(long press on the graphic button) on the
display in Android Auto.
Navigation
If the system "Nav" mode is already
active, or when a device is connected
to the car with a navigation session in
progress, the Uconnect™ system display
shows a pop-up alert enabling you to
choose between system navigation or
navigation using the smartphone.
The selection can be changed at any
time by accessing the chosen navigation
system and setting a new destination.
Setting "AutoShow smartphone display on
connection"
Through the Uconnect™ system
settings, the user can decide to
view the smartphone screen on the
Uconnect™ system display as soon as the
smartphone is connected to the car via
the USB port.
When this function is set, each time a
connection is made via USB, the Apple
CarPlay or Android Auto apps will run
automatically on the Uconnect™ system
display.
The "AutoShow smartphone display on
connection" item can be found in the
"Display" submenu. The function is
enabled by default.
Exiting the Android Auto and Apple CarPlay
apps
To end the Apple CarPlay or Android
Auto session, physically disconnect the
smartphone from the car's USB port.
SETTINGS
Press the
button to access the
"Settings" menu.
NOTE The menu items displayed vary
according to the versions.
The menu is indicative and includes the
following items:
Keysense
Language
321
Advertisement
Table of Contents
