Table of Contents
Advertisement
with the values given in the "Technical
specifications" chapter.
TIREKIT
(where provided)
DESCRIPTION
170) 171)
74)
3)
The TireKit is located in the luggage
compartment inside its own box.
The container is also equipped with a
screwdriver, the tow hook and the funnel
for refuelling in an emergency.
The TireKit fig. 181 comprises:
one cartridge (A) containing sealant
and fitted with: transparent tube for
injecting the sealant (D) and sticker
(C) with the wording MAX. 80 km/h /
50 mph to be applied in a clearly visible
position (e.g. on the dashboard) after
repairing the tyre;
one compressor (B);
a pair of gloves located in the hose
compartment of the cartridge (D).
202
181
REPAIR PROCEDURE
Proceed as follows:
stop the car in a position that is not
dangerous for oncoming traffic where
you can change the wheel safely. The
car must be stopped in a lay-by, car-
park or parking or service area, and the
ground must be as level as possible and
sufficiently compact;
switch off the engine, apply the
electric parking brake and engage 1
reverse gear;
put on the reflective safety jacket
before getting out of the car (if required
by the regulations in force). In any case,
follow the road safety laws in force in the
country where you are driving;
make sure that any passengers get
out of the car and go to a safe place
where they will not obstruct traffic or
be exposed to the risk of injury. In the
event of a puncture, change the tyre in
accordance with the laws of the country
in which you are travelling.
insert the sealant cartridge (A) into the
corresponding compressor compartment
(B) and press it down hard. Remove the
speed limit sticker (C) and apply it in a
clearly visible position;
wear the gloves;
remove the cap from the tyre valve and
J0A0955C
connect and screw the transparent tube
of the sealing fluid (D) onto the valve.
If a 250 ml cartridge is present the
housing of the transparent tube is
provided with removable ring to facilitate
extraction. Make sure that the ON-OFF
button (F) is in the off position (button
not pressed);
12V
or
st
182
ON
OFF
J0A0956
Advertisement
Table of Contents
