Table of Contents
Advertisement
Group
Group 0+
Group 1
Group 2
Group 3
The ECE-R44 standard was recently
paired with the ECE R-129 regulation,
which defines the characteristics of
the new i-Size child restraint systems
(see the "Suitability of passenger seats
for i-Size child restraint system use"
paragraph).
All restraint devices must bear the type-
approval data, together with the control
mark, on a label solidly fixed to the child
restraint system which must never be
removed.
Lineaccessori MOPAR
restraint systems for each weight group.
These devices are recommended, having
been specifically designed for Jeep cars.
WARNING For correct installation on the
vehicle, some universal child restraint
systems require an accessory (base)
sold separately by the restraint system's
producer. Therefore, FCA recommends
108
confirming the retailer if the desired
Weight groups
child seat can be installed in the car by
having it done, before buying the seat.
up to 13 kg in
weight
FITTING A CHILD RESTRAINT
SYSTEM WITH SEAT BELTS
9-18 kg
89) 90) 91)
15 - 25 kg
The Universal child restraint systems
installed with the seat belts only are
22 - 36 kg
type-approved on the basis of the ECE
R44 standard and are divided into
various weight groups.
WARNING The figures are indicative and
provided for assembly purposes only. Fit
the child restraint system according
to the instructions, which must be
included.
Group 0 and 0+
Infants up to 13 kg must be carried with
a rearward facing child restraint system
of the type shown in fig. 84 which,
includes child
supporting the head, does not induce
®
stress on the neck in the event of sudden
decelerations.
84
The child restraint system is restrained
by the car seat belts, as shown in fig. 84
and it must restrain the child in turn
with its own belts.
Group 1
Children weighing from 9 to 18 kg may
be transported in forward facing child
restraint systems fig. 85.
J0A0170C
Advertisement
Table of Contents
