Table of Contents
Advertisement
151
replace the blown bulb: to remove
the bulb (A) fig. 152 for versions with
halogen bulbs / (B) versions with LED
bulbs). Versions with halogen bulbs: to
remove the bulb, press on it gently (1)
fig. 152 and at the same time turn it
anticlockwise ((2)); Versions with LED
lights: remove the bulb and bulb holder
assembly;
insert the new bulb, by pressing it
fig. 152 and turning it clockwise, making
sure that it locks correctly;
then insert the bulb and bulb holder
assemblies in their respective housings
and turn them anticlockwise (right side)
and clockwise (left side), ensuring that
they are locked correctly;
reconnect the electrical connectors;
then reassemble the flap (B) fig. 153,
fully tightening fixing screws (A).
A
E
J0A0975C
B
152
Fog lights
Versions with halogen bulbs
To replace the bulbs, proceed as follows:
steer the wheels completely;
using a screwdriver, undo the screws
(A) fig. 153 and remove the flap (B);
2
153
1
working on the tab (C) fig. 154 remove
the electrical connector (D);
J0A0264C
154
turn the light bulb and holder (E)
fig. 154 counter-clockwise and replace
the bulb;
insert the new bulb and holder group,
making sure it is properly blocked;
J0A0211C
J0A0301C
187
Advertisement
Table of Contents
