Table of Contents
Advertisement
driver must never allow their attention
to lapse during potentially dangerous
manoeuvres, even those executed at low
speeds.
IMPORTANT
52) The sensors must be clean of mud,
dirt, snow or ice in order for the system
to operate correctly. Be careful not to
scratch or damage the sensors while
cleaning them. Avoid using dry, rough
or hard cloths. The sensors should be
washed using clean water with the
addition of car shampoo if necessary.
When using special washing equipment
such as high pressure jets or steam
cleaning, clean the sensors very quickly
keeping the jet more than 10 cm away.
53) Only have interventions on the
bumper in the area of the sensors carried
out by a Jeep Dealership. Interventions
on the bumper that are not carried out
properly may compromise the operation of
the parking sensors.
54) Only have the bumper repainted or
any retouches to the paintwork in the
area of the sensors carried out by a Jeep
Dealership. Incorrect paint application
could affect the operation of the parking
sensors.
152
ACTIVE PARKSENSE
(AUTOMATIC PARK
ASSIST) SYSTEM
(where provided)
137) 138) 139)
55) 56)
The system helps the driver to find
a suitable free parallel parking spot
according to the width of the car and
automatically manages the steering
wheel movement during manoeuvring.
The system also helps the driver
manoeuvre out from a parking space.
Sensors
The system uses the front, rear and side
sensors located in the front fig. 119 and
rear fig. 120 bumper.
119
J0A0639C
Advertisement
Table of Contents
