Installing Cat5 Suppression Ferrites - AMX Modero NXD-1200V Operation/Reference Manual

12” modero video touch panels g4 touch panels modero 1200v
Hide thumbs Also See for Modero NXD-1200V:
Table of Contents

Advertisement

Touch Panel Accessories
DESCRIPTION:
ELEMENT #1:
CONDUCTOR:
INSULATION:
COLOR CODE:
PAIR:
CABLE:
BINDER:
ELEMENT #2:
CONDUCTOR:
INSULATION:
COLOR CODE:
DRAIN WIRE:
SHIELD:
FINAL ASSEMBLY:
BINDER:
JACKET:
COLOR:
DIAMETER:
MARKING:
FIG. 12
Table Top Cable - Specification Elements
Each bundle of 4 twisted pairs includes a colored tape indicator for identification.

Installing CAT5 Suppression Ferrites

Before connecting the RJ-45 cables to the panel, install the necessary number of CAT5 Suppression
Ferrites (FIG. 13) to their appropriate locations. These ferrites come as part of the Installation Kits
mentioned in the previous Specification table (page 2). No tools are required for this installation.
Release the latch to
open the plastic
enclosure.
FIG. 13
Installing the CAT5 Suppression Ferrites
All 1200V-Series, VG-Series, and Table Top CV10 panels require the installation of
an appropriate number of CAT5 Suppression Ferrites when they use an RJ-45 cable
to feed an A/V signal from the breakout box.
1. The CAT5 Suppression Ferrite is housed within a plastic enclosure (shown in FIG. 12) with a latch
release on one side. Pull to release the latch and open the enclosure.
14
9/PAIRS COMPOSITE CABLE CONSISTING OF: ELEMENT #1:
TWO 4/PAIR 24 AWG STRANDED TINNED COPPER,
POLYETHYLENE INSULATION, ELEMENT #2: 1/PAIR 18 AWG
STRANDED TNNED COPPER, PVC INSULATION AND FOIL
SHIELDED OVERALL PAPER BINDER AND FLEX-PVC JACKET.
2 X 4/PAIRS:
24 AWG STRANDED COPPER
24 AWG 7/32 TINNED COPPER; OD .024" NOMINAL
.0075" WALL POLYETHYLENE; OD .039" NOMINAL
P1: WHITE/BLUE, BLUE
P2: WHITE/ORANGE, ORANGE
P3: WHITE/GREEN, GREEN
P4: WHITE/BROWN, BROWN
2 CONDUCTORS TWINNED LEFT HAND LAY
(TWISTED AT VARIED LAYS TO MINIMIZE CROSS TALK)
4/P CABLED LEFT HAND LAY (BLUE BINDER, ORANGE BINDER)
PAPER TAPE
1 PAIR: 18 AWG SHIELDED
18 AWG 16/30 TINNED COPPER; OD .046" NOMINAL
.010" WALL PVC; OD .066" NOMINAL
BLACK, RED
#22 7/30 TINNED COPPER
ALUM/POLYESTER TAPE (FOIL SIDE IN)
TWO ELEMENT #1 & ELEMENT #2 CABLED ON COMMON
AXIS TO MINIMIZE DIAMETER
CLOTH TAPE 25% OVERLAP
.045" WALL FLEXIBLE PVC,
BLACK MATT
.375 INCHES NOMINAL
NONE
Insert the CAT5
cable and close
the enclosure.
Push down on the
enclosure until it
snaps closed.
1200V Modero Video Touch Panels

Advertisement

Table of Contents
loading

This manual is also suitable for:

Modero nxt-1200v

Table of Contents