AMX Modero NXD-1200V Operation/Reference Manual page 117

Protected Setup Page Elements (Cont.)
Keyboard Layout:
(build 2.60 or higher)
FIG. 93 Protected Setup page-System Recovery confirmation dialog
Channel Port
Level Port
Channel Code
Number
FIG. 94 Button/slider Function Show example
1200V Modero Video Touch Panels
Displays the listing of supported international keyboard settings. The following
list allows the end-user to specify which international keyboard is being
connected to the Modero touch panel and then which characters should be
reflected within the G4 Computer Control and TakeNote applications:
- None (default), Spanish, Italian, French, German, Swiss, UK, and US
Note: You must be using a standard 101 button keyboard to accurately
utilize this feature.
• Modero uses the open-source VNC character standards to transmit the
character information to a target device such as a PC.
• One of the issues which occurred in the past was that some 101-key foreign
keyboard character sets were being incorrectly represented via the Computer
Control and Take Note applications.
• For example: Spanish keyboards consisting of Castilian character sets such
é)
as tilde ( were being miscommunicated by the VNC application to the
source computer and as a result, passwords were not properly being entered.
• The VNC - Computer Control keyboard drivers found in earlier Modero
firmware (build 57 or earlier) were using an English type/character set which
was not fully utilizing all available foreign characters.
• Several different countries have produced 101-key international keyboards,
each with their own unique set of keys occupying the keyboard. Several of
these keys are specific to the language they are used with.
Channel Code
Number
3,132 Address
Port
Button
2,8 3,50
Address Code
Number
Firmware Pages and Descriptions
You have a wait time of 5 seconds
before the YES option is enabled.
Channel Port
7,10
Slider
Level Port
4,9
1,8
Channel Code
Number
Channel Code
Number
Address
Port
Address Code
Number
107