Modero Table Top Cable (Ca2250-50); Product Specifications - AMX Modero NXD-1200V Operation/Reference Manual

The 3 wires used in a typical XLR lead are often referred to as Ground, Live (Hot) and Return (Cold).
"Live" and "Return" carry the "in-phase" and "out-of-phase" versions of the audio respectively. The pins
of the XLR plug/socket are as follows:
When connecting the MIC OUT connector to a balanced audio input (FIG. 8), use all three audio
terminals (+, -, and GND), then connect the "+" terminal to the "live" signal, the "-" terminal to the
"return" signal, and the "GND" terminal to the ground signal.
GND
OUT-
OUT+
FIG. 8 Wiring the rear MIC OUT connector for use with Balanced Audio

Modero Table Top Cable (CA2250-50)

The Modero Table Top Touch Panels come with a standard 10' (3.048 m) Modero cable
(CA2250-50) that supports Ethernet, Audio/Video, and Power connections. The cable comes terminated
with two RJ45 connectors (Ethernet and Audio/Video) and a single 2-pin mini-Phoenix connector for
power.
FIG. 9
10 Foot Modero Table Top Cable

Product Specifications

Modero Table Top Cable Specifications
Dimensions (HWD):
Connectors:
Included Accessories:
1200V Modero Video Touch Panels
• X = Ground
• L = Live (Hot)
• R = Return (Cold)
Ground signal
Return signal
Line signal
• Length: 10 feet (3.048 m)
• Ethernet RJ-45 connector (White) routes Ethernet signals between the touch
panel and the NXA-AVB/ETHERNET Breakout Box.
• Audio/Video RJ-45 connector (Black) routes differential audio/video signals
between the touch panel and the box.
• 2-pin 3.5 mm mini-Phoenix power connector to route power from the external
breakout box to the target panel.
• Modero Table Top Cable (CA2250-50)
Balanced OUT
Touch Panel Accessories
11