Setup Page - AMX Modero NXD-1200V Operation/Reference Manual

Firmware Pages and Descriptions
Setup Navigation Button Elements (Cont.)
Video Adjustment:
Battery Base:

Setup Page

This page (FIG. 83) centers around basic Modero panel properties such as: Connection Status of the
panel, Display Timeout, Inactivity Page Flip Time, Inactivity page file, and the Panel Brightness.
FIG. 83 Setup page
The elements of the Setup page are described in the table below:
Setup Page Elements
Exit:
Connection Status icon:
94
Press the Video Adjustment button to access the Video Adjustment page where
you can set the video properties for incoming video.
• This button only appears on Color Video (CV) capable touch panels.
• Refer to the Video Adjustment - Video Adjustment Page section on page 101
for more detailed information.
Press the Battery Base button to access the Battery Base page where you can
modify and monitor NXT-BP Modero Power Pack parameters.
• This button only appears when a Modero Table Top panel (NXT) is connected
to an NXA-BASE/B battery base.
• Refer to the Battery Base Page section on page 102 for more detailed
information.
Returns you to the Main touch panel page. In this case, the previous page is the
default Main page.
This visual display of the connection status allows the user to have a current
update of the panel's connection status regardless of what page is
currently active.
• A Lock only appears on the icon if the panel has established a connection
with a currently secured target Master (requiring a username and password).
Connection Status
Red Connection Status icon -
indicates no connection to a Master
Green Connection Status icon -
indicates communication to a Master
Video Adjustment button doesn't
appear on Non-Video (CA) panels
Battery Base button doesn't appear
until NXT is connected to a BASE/B
1200V Modero Video Touch Panels