Inspection And Maintenance - Optimum OPTImill MH 22V Operating Manual

5.2

Inspection and maintenance

The type and level of wear depends to a large extent on the individual usage and operating
conditions. Any indicated intervals therefore are only valid for the corresponding approved con-
ditions.
Interval Where?
Start of work,
after every main-
tenance or repair
work
Start of work,
after every main-
tenance or repair
work
Every week
Monthly
Every month
EN
MH22V│MH22VD
38
What? How?
 
Safety check on page 14

Oil all guide rails.
Oiling

Oil all bare steel surfaces. Use acid-free oil.
Oiling

Ensure that the clamping bolt for swivelling the drill head is
firmly tightened.
firmly tight-
ened

Lubricate all oiler cups with machine oil, do not use grease
guns or the like.
Oiling
Translation of original instruction Version 1.0.4 - 2020-07-28