1.9.3 Main Switch; Safety Check - Optimum OPTImill MH 22V Operating Manual

1.9.3 Main switch

WARNING!
Dangerous voltage even if the main switch is switched off.
The areas marked by the pictogram
might contain live parts, even if the main
switch is switched off.
Switch off the milling machine with the main
switch and lock it so it cannot be activated
by unauthorised personnel or switched on
by accident.
The main switch can be locked by removing
the shift lever.
All machine parts as well as all dangerous
voltages are switched off. Excepted are
only the positions which are marked with
the adjoining pictogram.
1.10

Safety check

Check the milling machine regularly.
Check all safety devices
before starting work,

once a week (with the machine in operation) and

after all maintenance and repair work.

General check
Equipment
Guards
Signs,
Markers
Functional check
Equipment
Emergency stop button
Separation guard around
the drill and milling spindle
EN
MH22V│MH22VD
14
Img.1-3: Main switch
Check
Mounted, firmly bolted and not damaged
Installed and legible
Check
After the emergency stop button is pressed, the milling machine
must switch off. It must only be possible to restart the machine, if
the emergency stop button is unlocked and the ON switch has
been pressed.
The milling machine may switch on only when the guard is
closed.
Translation of original instruction
1
OK
OK
Version 1.0.4 - 2020-07-28