Swivelling The Milling Head - Optimum OPTImill MH 22V Operating Manual

4.13

Swivelling the milling head

The milling head can be swivelled to the right and to the left.

Loosen the fastening screw on the milling head.

Turn the drill-mill head to the desired position.

Retighten the fastening screw.
INFORMATION
The milling head should be aligned after resetting to the initial position with a dial indicator so
that holes can be produced with the spindle sleeve at a right angle.
Set the zero degree angle step using your set-up.
Img.4-3: Swivelling the milling head
Version 1.0.4 - 2020-07-28
A
Zero degree angle step
Clamping screw
Translation of original instruction
B
MH22V│MH22VD EN
33