WARNING!
The separating protective equipment which is made available and delivered together
with the machine is designed to reduce the risk of workpieces or fractions of them which
being expelled, but not to remove them completely.
The geared drill includes the following safety devices:
an EMERGENCY STOP push button,
a lockable main switch,
a drilling table with T-slots to fix the workpiece or a vice,
adjustable drill chuck protection with position switch.
1.9.1
EMERGENCY-STOP push button
The geared drill is equipped with an
EMERGENCY STOP impact switch.
1.9.2
Main switch
The lockable main switch can be secured
in position "0" by a padlock to prevent
unauthorized or accidental activation.
When the main switch is off, the power
supply to the machine is completely inter-
rupted.
Except for the areas marked by the pictogram in the margin. In these areas there might be volt-
age, even if the main switch is switched-off.
EN
B50 GSM
68
EMERGENCY-
STOP
push button
Main switch
Translation of original instruction
Img.1-2:
EMERGENCY STOP impact switch
Img.1-3:
Main switch
Version 1.1.4 - 2021-01-04
Safety