Lockable Main Switch; Emergency-Stop Push Button; Milling Table - Optimum Optimill MT 50 Operating Manual

1.9.1 Lockable main switch

WARNING!
Dangerous voltage even if the main switch is switched-off.
In the areas marked by the ideogram in the margin, there might be voltage, even if the
main switch is switched off.
In the position "0FF" the lockable main
switch can be secured against accidental
or non-authorized switching-on by means
of a padlock.
When the main switch is switched-off, the
current supply is interrupted.
1.9.2

Emergency-stop push button

Turn the knob of the push button to the
right in order to be able to restart the
machine after having pressed the push
button.
Then switch off the main switch and switch
it on again.
1.9.3

Milling table

Seats for T-slots are attached to the milling table.
WARNING!
Risk of injury due to parts flying off at high speed. Securely fix the workpiece on the
milling table.
GB MT50
14
Main switch
EMERGENCY-
STOP
push button
Translation of original operating manual
Img.1-1: Main switch
Img.1-2: emergency-stop push button
Version 1.2.8 - 2020-08-03