Operator Positions; Safety Devices; Lockable Main Switch - Optimum Optimill F3 Operating Manual

OPTIMUM
M A S C H I N E N - G E R M A N Y
before taking the machine in operation

- have read and understood the operating manual,
- be familiar with all safety devices and instructions.
For work on the following CNC- machine parts there are additional requirements:
Electric components or operating materials: Must only be worked on by a qualified electri-

cian or person working under the instructions and supervision of a qualified electrician.
1.8

Operator positions

The operator position is in front of the CNC machine at the sight window or on the machine con-
trol panel.
1.9

Safety devices

Use the CNC machine only with properly functioning safety devices.
Stop the CNC machine immediately if safety device fails or is not functioning for any reason.
It is your responsibility!
If a safety device has been activated or has failed, the drilling machine must only be used if you
the cause of the fault has been eliminated,

you have verified that there is no danger to personnel or objects.

WARNING!
If you bypass, remove or deactivate a safety device in any other way, you are
endangering yourself and other personnel working with the CNC machine. The possible
consequences are:
injuries due to tools, workpieces or fragments hereof which are flying off at high

speed,
contact with rotating or moving parts,

fatal electrocution,

pulling-in of clothes.

The CNC machine includes the following safety devices:
a lockable main switch,

One EMERGENCY STOP push-button on the machine control panel and on the electronic

handwheel,
A locked, separating protective equipment around the CNC milling machine with sight win-

dows made of break-proof Makrolon.
Locking switch on the separating safety devices.


1.9.1 Lockable main switch

In the "0" position, the lockable main switch can be secured against accidental or non-author-
ised switching on by means of a padlock.
The power supply is interrupted by switchingoff the main plug.
Except for the areas marked by the pictogram in the margin. In these areas there might be volt-
age, even if the main switch is switched-off.
GB F3
Page 12 Original operating instructions
Additional
requirements
regarding the
qualification
Safety
Version 1.0 dated 2015-05-27