Local Network Cameras; Supported Cameras; Configuring Cameras; Add A Camera - 2gig Technologies EDGE Manual

Security & smart home system

Hide thumbs Also See for EDGE:

Table of Contents

Local Network Cameras

2GIG supported cameras can stream directly to the 2GIG EDGE panel.

NOTE: Only ONVIF cameras are supported .

NOTE: ONVIF Profile-S is required .

Cameras must first be added to same WiFi network as the 2GIG EDGE panel or to the panels access point. Cameras

on the local network are auto-discovered by the panel during the add camera process.

NOTE: A maximum of 8 devices can be added to the panels access point .

1. Access the Installer Toolbox, then tap CAMERA

SETTINGS.

2. Tap IP CAMERAS.

3. Tap the  ADD CAMERA button.

4. Use the keypad to enter a login name, then tap

SAVE.

Table of Contents