Remove Device; Security Inclusion Failure - 2gig Technologies EDGE Manual

Security & smart home system

Hide thumbs Also See for EDGE:

Table of Contents

Remove Device

To remove a device from the system:

1. At the Smart Home Settings menu, tap

Remove Device.

2. Follow on-screen instructions prepare the

device for removal.

3. Tap REMOVE DEVICE. The panel will listen

for a device to remove.

4. Follow the instructions included with the

Z-Wave device to start the Remove process.

The removed device will no longer be displayed.

5. Tap DONE.

If a Z-Wave device fails due to a security inclusion

failure, the following screen will be displayed:

1. Tap Remove Device.

2. The panel will display confirmation that the

device has been removed. Tap OK.

Table of Contents