Smart Home Controls
The Smart Home Controls menu allows the ability to control Z-Wave smart home devices at the 2GIG EDGE Panel.
The system supports a maximum of 232 Z-Wave devices.
Lights
Use the controls on the Lights screen to adjust smart
home lighting devices, or turn them On and Off.
Dim or Brighten Lights
To dim or brighten lights:
1. At the Smart Home menu, tap Lights.
2. At the Lights screen, swipe left to dim the light
or right to brighten. You can also tap the dim or
brighten icon.
Off / On Switch
Tap the switch to turn an assigned light Off or On.
Locks
Use the controls in the Locks screen to lock and unlock
your smart devices.
To lock and unlock devices:
1. At the Smart Home menu, tap Locks.
2. At the Locks screen, tap a switch to lock or
unlock.
Thermostats
Use the controls in the Thermostats screen to operate
your thermostats. To operate the thermostat:
1. At the Smart Home menu, tap Thermostats.
2. At the Thermostats screen, you have these
options:
»
To change the temperature set points,
press the top arrow to raise the temperature
or press the bottom arrow to lower the
temperature.
»
To change the fan setting, tap the current
setting to open a menu and tap the desired
option.
»
To change the thermostat mode, tap the
current setting to open a menu and tap the
desired mode.
5
Copyright © 2021 Nortek Security & Control LLC