Show/Hide A Smart Home Device; Check Network - 2gig Technologies EDGE Manual

Show/Hide a Smart Home Device

On the Edit Smart Home Device screen, tap the
switch to enable or disable the Show option. When
disabled, the system will hide the device from the
View Smart Home Devices screen.

Check Network

Check the network for failed nodes.
1. Tap Check Network.
2. Tap TEST.
3. The system scans the network for failed
nodes. This can take several minutes
and some of the Z-Wave functions will be
unavailable until the rediscovery is complete.
4. Once completed, the screen will display "failed
node" status.
5. Tap when finished to return to previous
menus.
19
Copyright © 2021 Nortek Security & Control LLC