Clean Screen; Installers Setup - 2gig Technologies EDGE Manual

Screensaver: My Photos
1. On the Screensaver option, tap >.
2. To display your own photos, follow
instructions outlined for the Main Panel.
Once configured, the Remote Keypad will
display photos loaded on the Main Panel.
NOTE: The USB flash drive must be formated FAT/
FAT32 .
Changing Screensaver Settings
Select from the following settings to adjust how your Screen Saver Photos are displayed:
1. Photo Duration – Select how long each photo will display before transitioning to the next photo (Options 30
seconds, 1, 2, or 5 minutes).
2. Transition Effect – (Options: None, Fade, Push, and Wipe).
3. Transition Duration – Number of seconds to transition between photos. (Options: 2, 3, or 5 seconds).
4. Display Sequence – Order in which the photos are displayed. (Options: By Photo Name, Shuffle (Random).
5. Full Landscape Mode – Tap to Enable or Disable.

Clean Screen

To clean the screen without affecting on-screen functions, press START for 30 seconds available for cleaning.
Wipe the touchscreen with a soft, dry, microfiber cloth that is specially designed for cleaning sensitive surfaces.
WARNING: Once cleaning mode begins, the touchscreen and all functions will be unavailable for 30 seconds, including the
Emergency Buttons .

Installers Setup

To access the Z-Wave Settings menu via the
Installer Toolbox:
1. On the Home Screen, tap the Settings Menu
( ).
2. Enter the Installer Access Code to gain
access to the panel settings.
3. Scroll down then tap the Installer Toolbox
icon.
2GIG EDGE Smart Home Manual
Screen Saver - Replace Photos
22