Screen Settings; Screen Brightness; Screen Timeout; Screen Saver - 2gig Technologies EDGE Manual

Security & smart home system

Hide thumbs Also See for EDGE:

Table of Contents

Screen Settings

Use the Screen Settings options to adjust the

screen brightness, dim brightness, backlight timeout,

screensaver features, and to place the touchscreen into

Clean Mode.

Adjust the screen brightness to improve the readability of the text and images on the touchscreen and to avoid eye

discomfort in darker environments or at night.

To adjust the screen brightness, swipe the Screen Brightness slide control to the left or right to decrease or increase

the brightness.

Tap the current setting, then select a new time for the screen to timeout (30 seconds to 10 mins). Default is 2 min.

The Screen Saver setting allows for photos to be

displayed when the screen times out.

1. Navigate to the Screen option (

2. On the Screensaver settings, select the current

setting then select from the dropdown list:

OFF – No screensaver

MY PHOTOS – displays preloaded photos

or photos you load, see the next section

Screensaver: My Photos.

DEMO MODE – for dealer use (must be

configured in Installer Toolbox).

1. Use a finger to scroll time settings to select a

specific time for the screensaver to be active.

2. When finished, tap SET.

3. Tap

when finished to return to previous

menus.

Table of Contents