Z-Wave Setup From Alarm.com Mobile Tech - 2gig Technologies EDGE Manual

Z-Wave setup from Alarm.com Mobile Tech

Z-Wave devices installed on the 2GIG EDGE Security & Smart Home System can be configured with Alarm.com
Mobile Tech.
1. Tap Add Devices.
5. If an S2 device is found,
the app will prompt for
the first 5 digits of the
key. Enter the 5 digits,
or tap the icon to scan
the QR code.
2GIG EDGE Smart Home Manual
2. Scroll down then tap
Z-Wave.
6. Scan QR code on the
device.
3. Tap Start Z-Wave Add
Mode.
7. The device will be
added to the panel.
24
4. The panel will enter
Learn Mode. Follow
on-screen instructions to
activate Learn mode on
the device.
8. The newly added device
will be displayed.
Repeat the process to
add other devices or
scroll down and select
Save.