Secondary Parameters Page; O2 Min/Max Page; Figure 12 Secondary Parameters Page; Figure 13 O2 Min/Max Page - Michell Instruments XTP601 User Manual

OPERATION
2.5.3

Secondary Parameters Page

Parameter Description
CELL T
PCB TEMP
COMP I/P
EXT I/P
2.5.4

O2 Min/Max Page

This indicates the minimum and maximum O
time of occurrence. The value is reset manually via the Reset Page in the User Menu.
NOTE: This data is not saved in NV memory and is not available via serial
communications or in the blind unit.
12
CELL T, °C
PCB TEMP, C
COMP I/P
EXT I/P
Figure 12
Sensor cell temperature display in set unit (°C, °F or Kelvin)
Display Resolution = 0.1
Temperature display of Microcontroller in selected temperature unit
This gives an indication of the internal GUB temperature
Display Resolution = 1 unit
Accuracy = ±2ºC
The value of compensation input (mA i/p channel 1) as a %
(4 mA=0% and 20 mA=100%)
displayed instead of value if external compensation is turned off
OFF
Value of the external input in the selected parameter and unit
(DEWP, TEMPR, PRESS or NONE)
displayed instead of value if external compensation parameter is set
OFF
to
NONE
MINIMUM
D12/01
MAXIMUM 0.00
D12/01
Figure 13
XTP601 User's Manual
50.0
28
OFF
OFF
Secondary Parameters Page
0.00 %02
T 19:29:44
%02
T 19:29:44
O2 Min/Max Page
values measured, along with date/
2
97313 Issue 5, May 2018