Alarms Log Pages; Info Page; Figure 14 Alarms Log Page; Figure 15 Info Page - Michell Instruments XTP601 User Manual

XTP601 User's Manual
2.5.5

Alarms Log Pages

A maximum of 40 High/Low alarms, along with date and time of occurrence, are
recorded in a ring buffer in NV memory. The most recent alarm will overwrite the oldest
alarm when more than 40 alarms are recorded. The data is displayed over a maximum
of 10 pages (with 4 alarms on each page). The latest alarm record is displayed in line
1 of page 1. This data is not available via serial communications or in the blind unit.
The data is reset manually via the Reset Page in the User Menu. The data is saved and
restored when the instrument is restarted. P1 = Page 1.
2.6

Info Page

From the Main Page it is possible to get to the Info Page by pressing the
The information available is displayed below:
Parameter
Firmware Ver
Hours used
Last Cal Date
Cal Press, mB
Atm Press, mB
ModBus Rx Code
Michell Instruments
ALARM DATE
AL1 02/01
AL1 02/01
AL1 02/01
AL2 02/01
Figure 14 Alarms Log Page
Firmware Ver
Hours Used
Last Cal Date
Cal Press. mB
Atm Press. mB
ModBus Rx Code
Figure 15
Description
Indicates the firmware version installed in the instrument
Indicates the number of hours that the instrument has been
powered up
The date of the last field or Michell Calibration
Character indicates for Field and
F
The atmospheric pressure recorded during the last calibration (used
as null reference point for pressure compensation)
Current atmospheric pressure being read within the analyzer
The received Modbus function code is flashed here as soon as
a function code is received – this is useful to check the Modbus
communications to ensure that good data is coming through.
If no code is received then '
TIME P1
12:50:40
11:10:32
11:00:29
10:20:00
1.0
125
04:08:11
1000.0
1000.0
---
Info Page
for Michell
M
' is displayed
---
OPERATION
button.
ESC
13