quadient iX-5 User Manual page 43

Frequently Asked Questions
System check list:
Question...
Do I have enough postage?
3
Do I need to clear the Batch
Counter?
Is the sealing/moistening device
properly filled?
(if installed)
Is the Weighing Platform prop-
erly zeroed or tared?
Are labels in place in the ALD?
(if you plan to print on tape)
Is there enough ink in the cart-
ridge?
38
Answer
Look at the credit counter at the bottom of the screen,
or:
Press
To add credit, see
page 83.
Clear batch counters if you intend to issue a report
on the mail run you are about to start (see
Report
Select Reset counter on the home screen, or
See How to Reset Batch Counters
For sealing while printing the envelopes.
For sealer-equipped feeders, see
Sealer Bottle
Before laying envelope(s) on the Weighing Platform,
your Home Screen should display 0 g. If _g is dis-
played, perform a 'rezero' of the WP.
See How to Rezero the Weighing Platform
160.
See How to Fill the Automatic Label Dispenser
page 76.
To display the level of ink in the printing headset, see
How to Display Ink Level and Cartridge Data
194.
You can be warned when the available credit gets below a preset
value (see How to Set the Low-Credit Threshold
and enter 1 to check your credit balance.
How to Add Credit to the PSD
on page 117).
on page 203.
on
Batch Data
on page 75.
How to Fill the
on page
on
on page
on page 156).